Set of 3 vintage wall lamps in smoked plexiglass, circa 1970's

Set of 3 vintage wall lamps, in acrylic smoked plexiglass circa 1970's., cylindrical oval shape with edges. The color varies from a smoked brown to a peach copper color, typical of the time (see photos.) at the front there is a hole in the center, and above and below there is a slot, which is part of the design, to facilitate the insertion of a bulb (see photos.) on the back of the inside of each wall lamp, there is a saucer-shaped plate in chrome color, to help diffuse the light. All 3 have sockets with bulbs type spot e27 (not included., (see photo), or an edison bulb if you prefer. The power of the bulb photographed in these images is 40 watts. We highly recommend a low-power bulb, as they can be very bright. There are 2 holes at the back of the wall mounting systems, to allow them to be mounted on a wall (see photos.) the lights are overall, in good original vintage condition, with slight signs and marks of age and prior use proportional to time, as well as a patina of time, on the general structures (see photos.) a small chip on the edge of the hole of 1 applies, at the top (see photo with 1 cent coin for perspective), and a small mark of previous use, on the inner edge of the hole of a different wall lamp, (see photo), which do not affect either the functionality of the pieces. At the top of one of the wall supports, a piece of plastic is missing (see photos), but naturally it will not be noticed once installed, because it is hidden by the inner saucer and will remain flush against a wall. All three have been tested and work (see photos.) dimensions per wall lamp: Width: 14cm X height: 15cm X depth: (including wall mount) 12cm. Hole diameter: 6.5 cm X 6.5 cm.

Ref. : 69FWRCRB