Pair of torch wall light or black and Chrome 60-70s cones

Beautiful pair of appliques from the 1960s and 70s with a rather special design: you could call it torch, trumpet or cone. Made all chrome or black lacquered metal. The cone glasses are very thick and moulded glass. Everything is original on these appliques except the two metal fasteners that allow them to be attached to the wall (I redid these fasteners as originally to facilitate the installation: attach the ties to the wall and then place the applicator and screw it in place). Special feature of these applicators: they can be installed directly where there is a light point (electric cable coming out of the wall) or you can add a wiring with a switch for installation at a place where there is no direct power; we can then just connect them to a wall socket. The hole with its protection to pass the cable is already present on the frame as can be seen in the images. Some very slight traces of use or shards on the painting but the whole thing remains very beautiful. The appliques have been disassembled, cleaned, checked and are ready for use. Socket E14 for any Led or Standard bulb. I noticed a tiny splinter on one of the globes at the connecion of the globe and the frame but it can not be seen, I saw it during the cleaning after disassembling it; I report it to be precise but again, it does not show at all, you have to feel it by passing the finger on it ... Some images show the appliques without the fasteners, they are well delivered with the appliques; some images show the appliques with the cable passage located at the top, that's just because I tested a little all the positions, not knowing too much if the trumpets should be opened up or down; finally I think the right position is with the cone up...

Ref. : 18P38RP4